Electrolux EF2 (washing machine)

Too Much Foam During Draining

What to do

  1. Switch the machine off.
  2. Clean the drain pump filter as described in your user manual. If you can see the pump impeller, turn it with a pencil, then refit the filter.
  3. Check the drain hose for kinks or blockages, and check that it is connected correctly.
  4. Run a hot 90 °C wash with no detergent to flush detergent residue out of the machine.
  5. From now on, dose detergent as the detergent maker recommends for your load and water hardness. Do not add extra for pre-soaked laundry.
  6. If EF2 keeps coming back even with the right dose and a clean filter and hose, call an authorised service centre.

Possible Causes

  • Too much detergent (overdosing)
  • Detergent powder residue built up in the machine, from too much detergent combined with regular low-temperature washes
  • Laundry already saturated with detergent, for example pre-soaked clothes
  • Very soft water (for example, with a water softener) while the dose is not adjusted to the detergent label
  • Drain filter dirty or blocked
  • Drain hose blocked or kinked

Description

EF2 is a warning from Electrolux-platform washing machines (Electrolux, AEG, Zanussi): the machine detected too much foam while draining. The usual cause is too much detergent, but a blocked or kinked drain hose or a dirty drain filter can cause it too. According to the Electrolux service manual, the warning appears after five attempts, or through a dedicated indicator light. On machines with only LEDs, codes in the F group flash 15 times and then twice for the second digit.

Appliance Error Codes Details

Error Code
EF2
Error Name
Too Much Foam During Draining
Appliance Type
washing_machine
Brand
Electrolux
Severity
low

Fact-checking completed

Verified by: Pavel Volkov
Information verified against official sources

Official Sources

Electrolux Service Manual: Washing machines & washer-dryers, guide to diagnostics of electronic controls, EWM2100 (599 70 56-70)

Manufacturer documentation